Description

Dravtech Big Bore shocks. About 96mm eye to eye length.

**Sold in pairs** (two complete shocks, available unassembled or assembled). Purchase quantity two for each vehicle.

Please understand that the anodizing varies from batch to batch, so the color of the shocks might be slightly different from the pictures above or previous batches that we have sold.

Includes everything you need:

6mm internal tuning spacer
Rod ends
Caps with rod end mod
Lathed down shock body
Springs
No pre load shock cups
Orings and seals
Titanium shock shafts
**No oil installed or included**

The little O rings supplied are for adjusting spring pre load….

You will most likely need some small snap ring pliers to assemble these shocks. Channel lock part #927 or even smaller #926 are great, Imperial part #IR-250H are also known good pliers. In the past, many have used standard auto store pliers, exacto knives, screwdrivers etc,. You can get away with a lot of things but there is the right tool for the job also.