PLEASE READ THE FULL DESCRIPTION BEFORE COMPLETING YOUR ORDER. 

2 PIECE HARDBODY SLIDERS – THIS PRODUCT WILL WORK WITH RC4WD MOJAVE AND TAMIYA HILUX HOLE PATTERN OR SIMILAR. ADJUSTBALE SLOT WILL ALLOW YOU TO SLIDE BACK 1″+. PACKAGE WILL INCLUDE X2 3D PRINTED BODY MOUNTS, X2 16G ALUMINUM INNER PIECES & X2 16G ALUMINUM OUTER SLIDER PIECES. PROTECTED YOUR BODY AND SLIDING PAST THOSE TOUGH ROCKS.

NOTES:

*HARDWARE NOT INCLUDED

*X4 M3x8mm & M3 NUT TO HOLD THE INNER AND OUTER SLIDER TOGETHER.

*X4 M3x8mm FROM SLIDER TO 3D PRINTED MOUNT

*X4 M3x8mm FROM BODY TO 3D PRINTED MOUNT (M3X10 SET SCREWS ARE AN OPTION AS WELL)

*THESE  ARE 7 DEGREES SLIDERS AND GS V4 CHASSIS HAS AN 8 DEGREE SKID, 1 DEGREE ISN’T NOTICEABLE AND WILL NOT AFFECT PERFORMANCE.

*THE HOLES AT THE TOP MOUNTING POSITION ARE DISTORTED DUE TO OUR BENDING TOOLING BUT THEY DO NOT AFFECT THE SLIDER.

*THE SLIDER PUSHED ALL THE WAY BACK WILL COME OFF THE CHASSIS VERY SLIGHTLY (SHOWN IN THE PICTURE).