Description

IERC Front Brace

UPDATED BRACES ONLY HAVE ONE HOLE ON CENTER UP TOP.

Constructed of 1/8” aluminum and textured powder-coated black, 4 tapped holes to accept m3 screws. This piece will stiffen up the frong of your aftermarket rails and can be used as a body mount (as shown in pictures).

Notes:

*Raw brace will dole from tumbling (will clean up nicely with a scotch-brite or can be polished).

*Top 3 holes are not tapped.

*This will fit the gpseed v3 rails or similar.

*Side mounting holes are 11mm apart.

*Brace is 70.5 Mm wide.