OD-3 Transmission for Straight Axles
Dlux Overdrive Transmission:
Extremely compact and lightweight 70.0g / 2.46oz
Dimensions, in mm:(35Lx59Wx36H)
Designed for motor forward mounting.
Mounting is accomplished by two M3 tapped holes, 23.0mm center to center (not angled).
7075 high strength aluminum case.
Heat treated alloy steel gears.
Grade 5 Titanium output shafts.
3.66:1 gearing, plus 44T spur gear.
Uses 48P pinion gears from 9 to 17 teeth.
Use 12T pinion gear as a starting point for most AR44 applications with overdrive front gears.
18.6% overdrive (both outputs spin same direction, so no need for flipped ring gears).
28% overdrive when used with underdrive rear ring and pinion.
38% overdrive when used with underdrive and overdrive ring and pinion.
***Now available in both left- and right-motor versions***
Left-motor has front output on the right side, and rear on the left.
Right-motor has front output on the left side, and rear on the right.
Chart above shows possible front axle ratios using stock Axial portal and AR44 straight axle gears