IERC V2 Merge
All the mounting points on this carbon fiber kit are the same. Changes to the rails are added holes to allow for a servo laydown using stock traxxas servo mount and our trx4 laydown servo mount. We also removed the bumper slot up front and added 2 mounting holes like our original merge.
A fusion between the class1 and our original merge with a few changes to bring you a modified low center gravity rail kit that allows for the transfer of all your existing axial scx10ii components. This kit also allows for the transfer of element components with the exception of the battery tray (x mount supplied). Kit comes assembled.
Changes are an slotted front and rear bumper mount section, an additional 2 holes for rear upper link adjustment, rear modified tower section so you can now run a corona brace at a 45 degree angle to for frame support or mounting accessories and most importantly a more leaned front shock tower position to give you less throw on a steep incline.
X:2 1/8” carbon fiber symmetrical rails
X1 3/16” servo/battery mount (x mount)
X1 1/8” aluminum front body mount brace (2.73” (69mm) outside to outside)
X1 1/8” aluminum rear center brace (2.65” (67mm) outside to outside)
X1 13g aluminum panhard mount
X1 delrin skid plate ( designed and manufactured by tj rc products)
X4 m3x16 set screws
V2 merge kit: 6.5oz (184g)
V2 rails only: 2.3oz (66g)
IERC front brace & corona rear brace will be raw.
Kit measures 3 in outside to outside of the rails. Hardware not included when purchasing the rails by themselves.
Skid hole pattern is for axial 3 gear transmission or simular, element trans is a direct bolt on.